This document describes some generic features and utilities provided by the libavutil library.
This section documents the syntax and formats employed by the FFmpeg libraries and tools.
FFmpeg adopts the following quoting and escaping mechanism, unless explicitly specified. The following rules are applied:
Note that you may need to add a second level of escaping when using the command line or a script, which depends on the syntax of the adopted shell language.
’ can be used to parse a token quoted or
escaped according to the rules defined above.
The tool ‘ tools/ffescape ’ in the FFmpeg source tree can be used to automatically quote or escape a string in a script.
Crime d'Amourcontaining the
'needs to be escaped when quoting it:
' this string starts and ends with whitespaces '
' The string '\'string\'' is a string '
'c:\foo' can be written as c:\\foo
The accepted syntax is:
[(YYYY-MM-DD|YYYYMMDD)[T|t| ]]((HH:MM:SS[.m...]]])|(HHMMSS[.m...]]]))[Z] now
If the value is "now" it takes the current time.
Time is local time unless Z is appended, in which case it is interpreted as UTC. If the year-month-day part is not specified it takes the current year-month-day.
There are two accepted syntaxes for expressing time duration.
HH expresses the number of hours, MM the number of minutes for a maximum of 2 digits, and SS the number of seconds for a maximum of 2 digits. The m at the end expresses decimal value for SS .
S expresses the number of seconds, with the optional decimal part m .
In both expressions, the optional ‘ - ’ indicates negative duration.
The following examples are all valid time duration:
12 hours, 03 minutes and 45 seconds
Specify the size of the sourced video, it may be a string of the form width x height , or the name of a size abbreviation.
The following abbreviations are recognized:
Specify the frame rate of a video, expressed as the number of frames generated per second. It has to be a string in the format frame_rate_num / frame_rate_den , an integer number, a float number or a valid video frame rate abbreviation.
The following abbreviations are recognized:
A ratio can be expressed as an expression, or in the form numerator : denominator .
Note that a ratio with infinite (1/0) or negative value is considered valid, so you should check on the returned value if you want to exclude those values.
The undefined value can be expressed using the "0:0" string.
It can be the name of a color as defined below (case insensitive match) or a
sequence, possibly followed by @ and a string
representing the alpha component.
The alpha component may be a string composed by "0x" followed by an hexadecimal number or a decimal number between 0.0 and 1.0, which represents the opacity value (‘ 0x00 ’ or ‘ 0.0 ’ means completely transparent, ‘ 0xff ’ or ‘ 1.0 ’ completely opaque). If the alpha component is not specified then ‘ 0xff ’ is assumed.
The string ‘ random ’ will result in a random color.
The following names of colors are recognized:
A channel layout specifies the spatial disposition of the channels in a multi-channel audio stream. To specify a channel layout, FFmpeg makes use of a special syntax.
Individual channels are identified by an id, as given by the table below:
top front left
top front center
top front right
top back left
top back center
top back right
surround direct left
surround direct right
low frequency 2
Standard channel layout compositions can be specified by using the following identifiers:
A custom channel layout can be specified as a sequence of terms, separated by ’+’ or ’|’. Each term can be:
av_get_default_channel_layout). Note that not all channel counts have a default layout.
AV_CH_*macros in ‘ libavutil/channel_layout.h ’.
Before libavutil version 53 the trailing character "c" to specify a number of channels was optional, but now it is required, while a channel layout mask can also be specified as a decimal number (if and only if not followed by "c" or "C").
See also the function
When evaluating an arithmetic expression, FFmpeg uses an internal formula evaluator, implemented through the ‘ libavutil/eval.h ’ interface.
An expression may contain unary, binary operators, constants, and functions.
Two expressions expr1 and expr2 can be combined to form another expression " expr1 ; expr2 ". expr1 and expr2 are evaluated in turn, and the new expression evaluates to the value of expr2 .
The following binary operators are available:
The following unary operators are available:
The following functions are available:
Compute absolute value of x .
Compute arccosine of x .
Compute arcsine of x .
Compute arctangent of x .
Compute principal value of the arc tangent of y / x .
Return 1 if x is greater than or equal to min and lesser than or equal to max , 0 otherwise.
Compute bitwise and/or operation on x and y .
The results of the evaluation of x and y are converted to integers before executing the bitwise operation.
Note that both the conversion to integer and the conversion back to floating point can lose precision. Beware of unexpected results for large numbers (usually 2^53 and larger).
Round the value of expression expr upwards to the nearest integer. For example, "ceil(1.5)" is "2.0".
Return the value of x clipped between min and max .
Compute cosine of x .
Compute hyperbolic cosine of x .
Return 1 if x and y are equivalent, 0 otherwise.
Compute exponential of
, the Euler’s number).
Round the value of expression expr downwards to the nearest integer. For example, "floor(-1.5)" is "-2.0".
Compute Gauss function of
, corresponding to
exp(-x*x/2) / sqrt(2*PI)
Return the greatest common divisor of x and y . If both x and y are 0 or either or both are less than zero then behavior is undefined.
Return 1 if x is greater than y , 0 otherwise.
Return 1 if x is greater than or equal to y , 0 otherwise.
This function is similar to the C function with the same name; it returns "sqrt( x * x + y * y )", the length of the hypotenuse of a right triangle with sides of length x and y , or the distance of the point ( x , y ) from the origin.
Evaluate x , and if the result is non-zero return the result of the evaluation of y , return 0 otherwise.
Evaluate x , and if the result is non-zero return the evaluation result of y , otherwise the evaluation result of z .
Evaluate x , and if the result is zero return the result of the evaluation of y , return 0 otherwise.
Evaluate x , and if the result is zero return the evaluation result of y , otherwise the evaluation result of z .
Return 1.0 if x is +/-INFINITY, 0.0 otherwise.
Return 1.0 if x is NAN, 0.0 otherwise.
Load the value of the internal variable with number var , which was previously stored with st( var , expr ). The function returns the loaded value.
Return linear interpolation between x and y by amount of z .
Compute natural logarithm of x .
Return 1 if x is lesser than y , 0 otherwise.
Return 1 if x is lesser than or equal to y , 0 otherwise.
Return the maximum between x and y .
Return the minimum between x and y .
Compute the remainder of division of x by y .
Return 1.0 if expr is zero, 0.0 otherwise.
Compute the power of x elevated y , it is equivalent to "( x )^( y )".
Print the value of expression t with loglevel l . If l is not specified then a default log level is used. Returns the value of the expression printed.
Prints t with loglevel l
Return a pseudo random value between 0.0 and 1.0. x is the index of the internal variable which will be used to save the seed/state.
Find an input value for which the function represented by expr with argument ld(0) is 0 in the interval 0.. max .
The expression in expr must denote a continuous function or the result is undefined.
is used to represent the function input value, which means
that the given expression will be evaluated multiple times with
various input values that the expression can access through
. When the expression evaluates to 0 then the
corresponding input value will be returned.
Round the value of expression expr to the nearest integer. For example, "round(1.5)" is "2.0".
Compute sine of x .
Compute hyperbolic sine of x .
Compute the square root of expr . This is equivalent to "( expr )^.5".
1/(1 + exp(4*x))
Store the value of the expression expr in an internal variable. var specifies the number of the variable where to store the value, and it is a value ranging from 0 to 9. The function returns the value stored in the internal variable. Note, Variables are currently not shared between expressions.
Compute tangent of x .
Compute hyperbolic tangent of x .
Evaluate a Taylor series at
, given an expression representing
-th derivative of a function at 0.
When the series does not converge the result is undefined.
is used to represent the derivative order in
which means that the given expression will be evaluated multiple times
with various input values that the expression can access through
is not specified then 0 is assumed.
Note, when you have the derivatives at y instead of 0,
can be used.
Return the current (wallclock) time in seconds.
Round the value of expression expr towards zero to the nearest integer. For example, "trunc(-1.5)" is "-1.0".
Evaluate expression expr while the expression cond is non-zero, and returns the value of the last expr evaluation, or NAN if cond was always false.
The following constants are available:
area of the unit disc, approximately 3.14
exp(1) (Euler’s number), approximately 2.718
golden ratio (1+sqrt(5))/2, approximately 1.618
Assuming that an expression is considered "true" if it has a non-zero value, note that:
works like AND
works like OR
For example the construct:
if (A AND B) then C
is equivalent to:
In your C code, you can extend the list of unary and binary functions, and define recognized constants, so that they are available for your expressions.
The evaluator also recognizes the International System unit prefixes. If ’i’ is appended after the prefix, binary prefixes are used, which are based on powers of 1024 instead of powers of 1000. The ’B’ postfix multiplies the value by 8, and can be appended after a unit prefix or used alone. This allows using for example ’KB’, ’MiB’, ’G’ and ’B’ as number postfix.
The list of available International System prefixes follows, with indication of the corresponding powers of 10 and of 2.
10^-24 / 2^-80
10^-21 / 2^-70
10^-18 / 2^-60
10^-15 / 2^-50
10^-12 / 2^-40
10^-9 / 2^-30
10^-6 / 2^-20
10^-3 / 2^-10
10^3 / 2^10
10^3 / 2^10
10^6 / 2^20
10^9 / 2^30
10^12 / 2^40
10^15 / 2^40
10^18 / 2^50
10^21 / 2^60
10^24 / 2^70
For details about the authorship, see the Git history of the project
(git://source.ffmpeg.org/ffmpeg), e.g. by typing the command
in the FFmpeg source directory, or browsing the
online repository at
Maintainers for the specific components are listed in the file ‘ MAINTAINERS ’ in the source code tree.